192.168.1.1 Router Login

192.168.1.1 is the most common router address in the world. TP-Link, Netgear, Linksys, ASUS, D-Link and dozens of ISP-supplied gateways use it as the default gateway, which makes it the address you type to reach the admin panel where Wi-Fi names, passwords, port forwarding and parental controls live. It sits at the very start of the 192.168.1.0/24 private range, so the router takes .1 and hands .2 to .254 to your devices.

Router address192.168.1.1
Open router login Opens on your local network only. Nothing is sent to ipchecker.net.

Default logins for devices on 192.168.1.1

Factory credentials by brand. Where a device prints a unique password on its label, that label overrides anything listed here. If a default fails, the password has been changed and a factory reset restores it.

Brand / modelUsernamePasswordNotes
TP-LinkadminadminArcher, TL-WR and TL-MR series; newer firmware asks you to set a password on first login
NetgearadminpasswordNighthawk, WNR and R-series; also reachable at routerlogin.net
LinksysadminadminE, EA and WRT series; older units use a blank username
ASUSadminadminRT-AC and RT-AX series; some newer models moved to 192.168.50.1
D-Linkadmin(blank)DIR series; some regional firmware uses admin / admin
Zyxeladmin1234ISP-supplied VMG and EMG gateways
Ubiquiti (legacy)ubntubntairOS and older EdgeRouter defaults
Cisco / Linksys businessadminadminRV series small-business routers

How to log in at 192.168.1.1

  1. Connect to the router’s network. Join its Wi-Fi or plug in with an Ethernet cable. Mobile data, a VPN, or a different router’s Wi-Fi will not reach 192.168.1.1.
  2. Type the address in the URL bar. Enter http://192.168.1.1 exactly, in the address bar at the top of the browser, not in a search box. Some devices also answer to a hostname such as tplinkwifi.net, routerlogin.net.
  3. Accept a certificate warning if one appears. Routers that use HTTPS on the local network present a self-signed certificate. On your own router the warning is expected; choose Advanced and proceed.
  4. Sign in. Use the credentials from the table above or from the label on the router. Usernames are case-sensitive on some firmware.
  5. Change the admin password. Do this before anything else. Default credentials are public, and remote management, if enabled, exposes the login to the internet.

Hostnames that reach the same page

These names resolve to 192.168.1.1 while you are connected to the device, and keep working even if the address has been changed.

HostnameDevices
tplinkwifi.netTP-Link
routerlogin.netNetgear
router.asus.comASUS
myrouter.localLinksys
dlinkrouter.localD-Link

Common mistypes of 192.168.1.1

None of these open anything. Each is a slip that sends people to a search page or a timeout instead of the admin panel.

192.168.l.l192.168.1.1.1192.168.1www.192.168.1.1http 192.168.1.1192.168.1.1.com192.168.11192.168.1.1 ✓

192.168.1.1 will not open: what to check

Wrong gateway. The most common cause by far. Read the Default Gateway from your device: ipconfig on Windows, Wi-Fi details on macOS, iPhone and Android, or ip route on Linux. If it is not 192.168.1.1, that is the address to use.

Typed into search. A page of search results means the address went to a search engine. Click the address bar, clear it, and type the IP again. Adding http:// in front forces the browser to treat it as an address.

HTTPS forced. Some browsers upgrade to https:// automatically and the router does not answer there. Type http:// explicitly.

VPN or private DNS. A VPN routes everything away from the local network; secure DNS in the browser can break router hostnames. Turn both off while you log in.

169.254.x.x address. If your device shows an address starting 169.254, it never received one from the router. Restart both devices, and check the cable or Wi-Fi connection.

Forgotten password. Defaults failing means someone changed the password. Hold the reset button for about ten seconds to return the unit to factory settings, which also erases its configuration and Wi-Fi name.

Find your router’s real address

DeviceWhere to look
Windows 10 / 11Command Prompt → ipconfig → Default Gateway
macOSSystem Settings → Wi-Fi → Details → TCP/IP → Router
iPhone / iPadSettings → Wi-Fi → (i) → Router
AndroidWi-Fi → network details → Gateway (varies by maker)
Linuxip route | grep default

Related addresses

192.168.0.1

TP-Link, D-Link, Netgear, Tenda

192.168.1.254

BT Hub, Technicolor, 3Com

192.168.1.2

Second router, AP or first client

192.168.50.1

ASUS routers (2019 onwards)

10.0.0.1

Xfinity, Comcast, Arris

All router login IPs

Frequently asked questions

What is 192.168.1.1 used for?
It is the private address most home routers assign to themselves. Typing it into a browser while connected to the router opens the admin panel where you manage Wi-Fi, security, connected devices and port forwarding.
What is the default username and password for 192.168.1.1?
There is no single answer because the address is shared by many brands. TP-Link, Linksys and ASUS use admin / admin, Netgear uses admin / password, D-Link uses admin with a blank password, and Zyxel ISP gateways use admin / 1234. If the router came from your provider, the password is usually printed on the label.
Why does 192.168.1.1 say the site can’t be reached?
Your router probably uses a different gateway address, such as 192.168.0.1 or 10.0.0.1. Check the Default Gateway in your device’s network settings, make sure you are connected to that router and not to mobile data or a VPN, and type the address in the URL bar rather than the search box.
Is 192.168.1.1 my public IP address?
No. It is a private address that only exists inside your network. Your public IP is assigned by your provider and is what websites see; the What Is My IP tool on the homepage shows it.
How do I change the Wi-Fi password at 192.168.1.1?
Log in, open the Wireless or Wi-Fi section, choose the 2.4 GHz or 5 GHz band, replace the passphrase with at least 12 characters, keep WPA2-AES or WPA3, and save. Every device will disconnect and need the new key.
Scroll to Top