192.168.8.1 Login (Huawei Mobile Wi-Fi)

192.168.8.1 belongs to Huawei’s mobile broadband range: the pocket-sized E5 and E5573 Mobile Wi-Fi units, the B310, B315, B535 and B818 4G and 5G routers, the HiLink USB dongles, and the carrier-branded versions of all of them sold by Vodafone, Three, Airtel, Zain, Telkom, Jazz and Zong. Because these devices run from a SIM, the admin page includes things a home router never shows: signal strength, network mode, data usage, APN settings and SMS.

Default logins for devices on 192.168.8.1

Factory credentials by brand. Where a device prints a unique password on its label, that label overrides anything listed here. If a default fails, the password has been changed and a factory reset restores it.

How to log in at 192.168.8.1

1. Connect to the mobile router’s network. Join its Wi-Fi or plug in with an Ethernet cable. Mobile data, a VPN, or a different router’s Wi-Fi will not reach 192.168.8.1.
2. Type the address in the URL bar. Enter http://192.168.8.1 exactly, in the address bar at the top of the browser, not in a search box. Some devices also answer to a hostname such as homerouter.cpe, mobilewifi.home.
3. Accept a certificate warning if one appears. Routers that use HTTPS on the local network present a self-signed certificate. On your own router the warning is expected; choose Advanced and proceed.
4. Sign in. Use the credentials from the table above or from the label on the mobile router. Usernames are case-sensitive on some firmware.
5. Change the admin password. Do this before anything else. Default credentials are public, and remote management, if enabled, exposes the login to the internet.

Settings you will only find on a mobile router

Open Settings after logging in and you will see Mobile Network, where you choose 4G-only or automatic mode and can force a band if the signal on one is poor; Dial-up or APN, where a carrier’s access point name goes if the device did not pick it up from the SIM; Statistics, which tracks data used against your plan; and SMS, which lets you read balance and top-up messages from the carrier. The Antenna setting on B-series routers switches between the internal aerials and an external one plugged into the SMA ports on the back, which can make a large difference in rural areas.

Hostnames that reach the same page

These names resolve to 192.168.8.1 while you are connected to the device, and keep working even if the address has been changed.

Common mistypes of 192.168.8.1

None of these open anything. Each is a slip that sends people to a search page or a timeout instead of the admin panel.

192.168.8.1 will not open: what to check

Wrong gateway. The most common cause by far. Read the Default Gateway from your device: ipconfig on Windows, Wi-Fi details on macOS, iPhone and Android, or ip route on Linux. If it is not 192.168.8.1, that is the address to use. Mobile routers only answer from their own Wi-Fi; a laptop still connected to the home network will time out.

Typed into search. A page of search results means the address went to a search engine. Click the address bar, clear it, and type the IP again. Adding http:// in front forces the browser to treat it as an address.

HTTPS forced. Some browsers upgrade to https:// automatically and the router does not answer there. Type http:// explicitly.

VPN or private DNS. A VPN routes everything away from the local network; secure DNS in the browser can break router hostnames. Turn both off while you log in.

169.254.x.x address. If your device shows an address starting 169.254, it never received one from the router. Restart both devices, and check the cable or Wi-Fi connection.

Forgotten password. Defaults failing means someone changed the password. Hold the reset button for about ten seconds to return the unit to factory settings, which also erases its configuration and Wi-Fi name.

Find your router’s real address

Related addresses

All router login IPs

Frequently asked questions