192.168.88.1 Router Login

192.168.88.1 is reserved for one manufacturer. Every MikroTik router, from the small hAP units used in homes and cafés to the CCR carrier routers, ships with this address on its LAN bridge and with RouterOS behind it. Unlike consumer routers, MikroTik gives you three ways in: WebFig in a browser, the WinBox desktop application, and SSH or Telnet for the command line. The web interface is enough for Wi-Fi and basic settings; WinBox is what network engineers actually use.

Default logins for devices on 192.168.88.1

Factory credentials by brand. Where a device prints a unique password on its label, that label overrides anything listed here. If a default fails, the password has been changed and a factory reset restores it.

How to log in at 192.168.88.1

1. Connect to the router’s network. Join its Wi-Fi or plug in with an Ethernet cable. Mobile data, a VPN, or a different router’s Wi-Fi will not reach 192.168.88.1.
2. Type the address in the URL bar. Enter http://192.168.88.1 exactly, in the address bar at the top of the browser, not in a search box. Some devices also answer to a hostname such as router.lan.
3. Accept a certificate warning if one appears. Routers that use HTTPS on the local network present a self-signed certificate. On your own router the warning is expected; choose Advanced and proceed.
4. Sign in. Use the credentials from the table above or from the label on the router. Usernames are case-sensitive on some firmware.
5. Change the admin password. Do this before anything else. Default credentials are public, and remote management, if enabled, exposes the login to the internet.

WebFig, WinBox or Quick Set?

On first login RouterOS opens Quick Set, a single page that configures internet mode, Wi-Fi name and key, and the LAN range without touching the full interface. For most homes that is enough. WebFig, reached from the menu, exposes every RouterOS feature in the browser. WinBox, downloaded free from mikrotik.com, connects even when the router has no IP address by using the MAC address, which makes it the tool to recover a misconfigured unit. RouterOS updates are applied from System, then Packages; MikroTik releases them often and they matter for security.

Hostnames that reach the same page

These names resolve to 192.168.88.1 while you are connected to the device, and keep working even if the address has been changed.

Common mistypes of 192.168.88.1

None of these open anything. Each is a slip that sends people to a search page or a timeout instead of the admin panel.

192.168.88.1 will not open: what to check

Wrong gateway. The most common cause by far. Read the Default Gateway from your device: ipconfig on Windows, Wi-Fi details on macOS, iPhone and Android, or ip route on Linux. If it is not 192.168.88.1, that is the address to use.

Typed into search. A page of search results means the address went to a search engine. Click the address bar, clear it, and type the IP again. Adding http:// in front forces the browser to treat it as an address.

HTTPS forced. Some browsers upgrade to https:// automatically and the router does not answer there. Type http:// explicitly.

VPN or private DNS. A VPN routes everything away from the local network; secure DNS in the browser can break router hostnames. Turn both off while you log in.

169.254.x.x address. If your device shows an address starting 169.254, it never received one from the router. Restart both devices, and check the cable or Wi-Fi connection.

Forgotten password. Defaults failing means someone changed the password. Hold the reset button for about ten seconds to return the unit to factory settings, which also erases its configuration and Wi-Fi name.

Find your router’s real address

Related addresses

All router login IPs

Frequently asked questions